Component test Motor or solenoid number Comments
YELLOW LASER SCANNER M9 Activates the yellow/magenta scanner
motor for 10 seconds.
FUSER MOTOR M2 Activate the fuser motor at a specified
speed for 10 seconds.
FUSER PRESSURE RELEASE
MOTOR
M2 reverse Reverses the fuser motor and
pressurizes or depressurizes the
pressure release motor.
ALIENATION MOTOR M10 Disengages the developer from the
primary charge roller.
ITB CONTACT ALIENATION MOTOR M2 Activates the ITB drive motor at a
specified speed for 10 seconds.
TCU MOTOR M12 Activates the motor at a specified speed
for 10 seconds.
TRAY 1 PICKUP SOLENOID SL3 Activates the solenoid for 10 seconds.
TRAY 2 PICKUP MOTOR M13 Activates the motor at a specified speed
for 10 seconds.
TRAY 2 PICKUP SOLENOID SL4 Activates the solenoid for 10 seconds.
TRAY 3 PICKUP MOTOR M1 Activates the motor at a specified speed
for 10 seconds.
TRAY 3 PICKUP SOLENOID SL1 Activates the solenoid for 10 seconds.
DUPLEX PICKUP MOTOR M11 Activates the motor at a specified speed
for 10 seconds.
DUPLEX REFEED CLUTCH
SOLENOID
CL1, SL2 Activates the clutch for 10 seconds.
Table 7-5 Component test details (continued)
410 Chapter 7 Solve problems ENWW
To Next Page
Loading...
