Default Copy Options
Administration > Default Job Options > Default Copy Options
Table 2-4 Default Copy Options menu
Menu item Sub-menu item Values Description
Number of Copies Type the number of
copies. The factory
default setting is 1.
Set the default number of copies for a copy job.
Number of Sides 1
2
Set the default number of sides for copies.
Color/Black Auto Detect
Color
Black (default)
Choose whether the default copy mode is color, black,
or automatically detected, based on the original.
Collate Off
On (default)
Set up the option for collating sets of copies.
If On is selected, the product prints a complete copy of
the print job before starting on the next copy.
Otherwise, the product prints the first page of all copies
before printing the second page, and so on.
Edge-To-Edge Normal (recommended)
(default)
Edge-To-Edge Output
If the original document is printed close to the edges,
use the Edge-To-Edge feature to avoid shadows along
the edges. Combine this feature with the Reduce/
Enlarge feature to ensure that the entire page appears
on the copies.
Auto Include Margins Off (default)
On
This feature automatically reduces the image size
during scanning so the margins are included.
ENWW Default Job Options menu 21
To Next Page
Loading...
