Default Fax Options
Administration > Default Job Options > Default Fax Options
NOTE: This menu is available only for the HP Color LaserJet CM3530fs MFP.
Table 2-5 Fax Send menu
Menu item Sub-menu item Values Description
Resolution Standard (100x200dpi)
(default)
Fine (200x200dpi)
Superfine (300x300dpi)
Set the resolution for sent documents. Higher
resolution images have more dots per inch (dpi), so
they show more detail. Lower resolution images have
fewer dots per inch and show less detail, but the file
size is smaller.
Fax Header Prepend (default)
Overlay
Select the position of the fax header on the page.
Select Prepend to print the fax header above the fax
content and move the fax content down on the page.
Select Overlay to print the fax header over the top of
the fax contents without moving the contents down.
Using this option could prevent a single-page fax from
flowing onto another page.
Table 2-6 Fax Receive menu
Menu item Sub-menu item Values Description
Fax Forwarding Fax Forwarding Off (default)
Custom
To forward received faxes to another fax device, select
Fax Forwarding and Custom. Then type the number of
the other fax device into the Fax Forwarding Number
field. When you select the Fax Forwarding menu item
for the first time, you are prompted to set up a PIN. Type
that PIN every time you use this menu. This PIN is also
used to access the Fax Printing menu.
Change PIN Use this option to change the PIN for the Fax
Forwarding menu.
Stamp Received Faxes Enabled
Disabled (default)
Add the date, time, senders phone number, and page
number to each page of the faxes that this product
receives.
Fit to Page Enabled (default)
Disabled
Shrink faxes that are larger than Letter-size or A4-size
so that they can fit onto a Letter-size or A4-size page.
If it this feature set to Disabled, faxes larger than Letter
or A4 will flow across multiple pages.
Fax Paper Tray Select from the list of
trays. The default setting
is Automatic.
Select the tray that holds the size and type of paper that
you want to use for incoming faxes.
22 Chapter 2 Control panel ENWW