Product resets
Restore factory settings
Use the Resets menu to restore factory settings.
1. Scroll to and touch Administration and then touch Resets.
2. Touch Restore Factory Settings and then touch Reset.
For more information, see
Resets menu on page 53.
Hard disk initialization (optional)
A hard disk initialization will erase and reformat the product's hard disk. Perform hard disk initialization
only if an error code displays on the control panel indicating a disk error. Always try initializing the hard
disk before replacing it.
1. Turn the product on.
2. As the product performs its power-on sequence, press and hold the Start button until all lights on
the control panel are lit.
3. Press the 5 key. The INITIALIZE DISKS menu item appears.
4. Press the 6 key. The product initializes the hard disk and continues its power-on sequence.
ENWW Service mode functions 505
To Next Page
Loading...
