Default Print Options
Administration > Default Job Options > Default Print Options
Table 2-7 Default Print Options menu
Menu item Sub-menu item Values Description
Copies Per Job Type a value. Set the default number of copies for print jobs.
Default Paper Size (List of supported sizes) Select a paper size.
Default Custom Paper
Size
Unit of measure Millimeters
Inches
Configure the default paper size that is used when the
user selects Custom as the paper size for a print job.
X Dimension Configure the width measurement for the Default
Custom Paper Size.
Y Dimension Configure the height measurement for the Default
Custom Paper Size.
Print Sides 1-sided
2-sided
Select whether print jobs are single-sided or double-
sided by default.
2-Sided Format Long Edge (Default)
Short Edge
Use this feature to configure the default style for 2-
sided print jobs.
If Long Edge is selected and the job has a portrait
orientation, the job will result in a book style. If the job
is landscape, a calendar style (flipping up the pages)
will result.
If Short Edge is selected and the job has a portrait
orientation, the job will result in a calendar style. If the
job is landscape, a booklet style will result.
ENWW Default Job Options menu 25
To Next Page
Loading...
