Time/Scheduling menu
Administration > Time/Scheduling
Use this menu to set options for setting the time and for setting the product to enter and exit sleep mode.
NOTE: Values shown with "(default)" are the factory-default values. Some menu items have no default.
Table 2-8 Time/Scheduling menu
Menu item Sub-menu item Sub-menu item Values Description
Date/Time Date Format YYYY/MMM/DD
(default)
MMM/DD/YYYY
DD/MMM/YYYY
Use this feature to set the current date and
time, and to set the date format and time
format that are used to time-stamp outgoing
faxes.
Date Month
Day
Year
Time Format 12 hour (AM/PM)
(default)
24 hour
Time Hour
Minute
AM
PM
Time Zone Select a time zone
from the list.
Select the time zone where the product is
located.
Adjust for Daylight
Savings
Enabled
Disabled
Sleep Delay 1 Minute
15 Minutes
20 minutes
30 minutes (default)
45 minutes
1 hour (60 minutes)
90 minutes
2 hours
4 Hours
Use this feature to select the time interval that
the product should remain inactive before
entering Sleep Mode.
Wake Time Monday
Tuesday
Off (default)
Custom
Select Custom to set a wake time for each
day of the week. The product exits sleep
mode according to this schedule. Using a
sleep schedule helps conserve energy and
26 Chapter 2 Control panel ENWW
To Next Page
Loading...
