16 Chapter 1 Troubleshooting control panel messages
EN
The top output bin holds 200 sheets of paper. Sensor PS9 along with its
sensor flag detects the height of the output paper stack.
1 Verify that PS9 moves freely and its movement is not blocked.
2 Verify that PS9 is free of dust and debris (the printer’s top cover
must be removed to access the sensor).
3 Verify that all connectors are firmly seated. Refer to the wiring
diagram in chapter 10.
Note
For more information, see the service manual for the printer.
The printer is executing a memory reset. The printer returns to the
READY
state upon completion of this process.
• No action is required.
The color calibration density values have been reset to their default
values.
• No action is required.
The language selection power-up key sequence has been entered. The
printer will prompt the user to select a new control panel display
language once it has completed its initialization process.
• Select a new language when prompted.
Remove paper top output bin
Resetting memory
Resetting values finished
Select language
To Next Page
Loading...