HP Color LaserJet 4500 - Page 23

EN
Control panel messages
17
1
The service mode powerup key sequence has been entered. The
printer will remain in service mode until
G
O
is pressed.
• Press
G
O
to exit the service mode.
The toner cartridge specified is low on toner.
• Printing will continue until a
TONER OUT
message appears. To
change the toner cartridge now, press
S
ELECT
.
The toner cartridge specified is low on toner and must be replaced.
• Press
S
ELECT
to enter the toner replacement menu.
The toner cartridge specified is out of toner.
• If the
TONER OUT
setting in the Configuration menu is set to
OVERRIDE
, press
G
O
to resume printing.
• Press
S
ELECT
to enter the toner replacement menu. Press
G
O
to
resume printing without changing the cartridge.
Service mode
Toner CMYK low
Toner CMYK low
alternates with
Press Select to change toner
Toner CMYK out
alternates with
Press Select to change toner