18 Chapter 1 Troubleshooting control panel messages
EN
Indicates the current state of a particular toner cartridge. This message
is displayed when S
ELECT
is pressed while a
TONER LOW/OUT
message
is displayed.
• If necessary, replace the specified toner cartridge.
The transfer kit is near the end of its expected life.
• Although printing can continue, the transfer kit should be replaced
for optimum printer operation.
The transfer kit has reached the end of its expected life.
• Replace the transfer kit.
The specified tray is empty but the current job does not require this tray
to complete the job.
• No action is required. However, to avoid this message in the future,
load the proper media type and size into the tray.
The specified media type and size need to be loaded into the requested
tray.
• Load the specified media type and size into the requested tray.
Press G
O
to override this request and cause the page to be printed
on different media.
Toner position [color] = [state]
Transfer kit low replace kit
Transfer kit out replace kit
Tray x empty [type] [size]
Tray x load [type] [size]
To Next Page
Loading...