144 Chapter 9 Image quality
EN
• The paper does not meet HP paper specifications.
• The printer’s operating environment does not meet specifications.
• The print density is set incorrectly.
– Change to a darker setting and retry printing.
• The fuser setting was wrong for the paper type.*
• The DC controller PCA is defective.
• The high-voltage power supply PCA is defective.
• The transfer roller is defective.
• “Draft mode” or “EconoMode” is selected in the software.
*This feature does not apply to all products
If the transparency colors are dull or dark:
• Ensure the transparencies meet the specifications for this printer
(part number C2934A for letter, and C2936A for A4)
.
Dropouts
Dull or dark transparencies
To Next Page
Loading...