HP Color LaserJet 4500 - Page 23

EN
Control panel messages
17
1
The language selection power-up key sequence has been entered. The
printer will prompt the user to select a new control panel display
language once it has completed its initialization process.
• Select a new language when prompted.
The service mode power-up key sequence has been entered. The
printer will remain in service mode until
G
O
is pressed.
• Press
G
O
to exit the service mode.
The toner cartridge specified is low on toner. This message appears if
TONER LOW = CONTINUE
(default) is set on the front panel in the
configuration menu.
• Printing will continue until a
TONER OUT
message appears. To
change the toner cartridge now, press
S
ELECT
.
The toner cartridge specified is low on toner and must be replaced. This
message appears when
TONER LOW = STOP
is set on the front panel in
the configuration menu.
• Press
S
ELECT
to enter the toner replacement menu.
The toner cartridge specified is out of toner.
• Press
S
ELECT
to enter the toner replacement menu.
• Press
G
O
after replacing the toner cartridge.
Select language
Service mode
Toner CMYK low
Toner CMYK low
alternates with
Press Select to change toner
Toner CMYK out
alternates with
Press Select to change toner