©2008 Copyright Hewlett-Packard
Development Company, L.P.
2
www.hp.com
HP Color LaserJet CM6030 and CM6040 MFP Series Copy
How do I Steps to perform
Select copy output options
The product offers several features to optimize copied
output. These features are all available on the Copy
screen. Touch Copy to display the Copy screen.
The Copy screen consists of several pages. From the
first page, touch More Options (1) to go to the next
page. Then touch the up or down arrow buttons to
scroll to other pages.
For details about how to use an option, touch the
option, and then touch the Help button (2) in the upper
right corner of the screen.
Collate copy jobs
The product can automatically collate multiple copies
into sets.
For example, if you are making two copies of three
pages and the automatic collation is on, the pages print
in this order: 1,2,3,1,2,3. If automatic collation is off,
the pages print in this order: 1,1,2,2,3,3.
To use the automatic collation, the original document
size must fit into the memory. If it does not, the product
makes only one copy and a message appears notifying
you of the change. If that happens, use one of the
following methods to finish the job:
• Split the job into smaller jobs that contain
fewer pages.
• Make only one copy of the document at a
time.
• Turn off the automatic collation.
The collation setting you select is in effect for all copies
until you change the setting. The collation default
setting is automatic copy collation.
To turn collation off, touch Copy and then touch
Staple/Collate (3). Touch None and then touch OK.
1
2
3
To Next Page
Loading...