Installing the Software 17
10. After the files are copied, the Colorado Backup main window appears
with a dialog box indicating that Windows needs to be restarted before
Colorado Backup will work properly. Make sure all applications are closed
and click on OK. Colorado Backup and Windows are exited and restarted.
When the main window reappears, you are ready to configure the tape
drive.
Configuration begins with the following dialog box. Click on any Help
button if you need more information about the displayed dialog box.
11. Accept the default setting by clicking on OK.
The following screen appears:
12. Click on Yes.
13. You are notified that the configuration process was successful. Click on
OK.
A dialog box appears indicating that the installation is complete and the
settings have been saved. It also contains brief instructions for creating
an automated backup system.
This is the
configuration you
are performing.
To Next Page
Loading...
