26 Installation Guide
The following menu appears:
6. Click on the Install button. Follow the instructions on the screen.
7. You are prompted to install the HP Colorado 5GB external driver files.
Click on Yes.
8. When prompted to restart your computer, click on Yes.
9. Your computer is restarted and Windows NT reappears. Log in with
Administrative rights.
10. Go to the Control Panel and choose the Tape Devices icon.
11. Go to the Devices tab and click on Detect.
12. Windows NT version 4.0 should auto-detect the device. A message box
asks if you wish to install the QIC-157 driver. Click OK.
If the QIC-157 driver does not automatically configure, then you must
add it manually. If the drive is not auto-detected, you will be presented
with a list of drivers. Under the Standard Tape Drives section, choose the
QIC-157... driver. You will be asked for the path (in the i386 directory of
the Windows NT CD).
Click here to install the
required driver files for the
tape drive.
Click here to view the CD’s
contents.
To Next Page
Loading...
