EL-MF877-00 Page 3
Template Revision B
PSG instructions for this template are available at EL-MF877-01
1. Remove the access panel (see figure 1-2)
2. Remove the front bezel (see figure 3-4)
3. Remove Fan duct and heatsink (see firgure 5-11)
4. Remove CPU (see figure 12-13)
5. Remove Memory Module (see figure 14-15)
6. DIsconnect all internal cable from PCA (see figure 16)
7. Remove ODD and rotate ODD cage (see figure 17-18)
8. Remove 1
st
HDD (see figure 19-20
9. Remove PCA (see figure 22-23)
10. Remove Battery (see figure 24-25)
11. Release PSU case (see figure26-28)
12. Remove PSU PCA and Fan (see figure29-32)
13. Remove electrical capacitors from PCA (see figure33)
14.
15.
16.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
To Next Page
Loading...
