HP Compaq 6200 Pro SFF - Slots; Bays; Controller

Slots SFF MT
Conventional PCI
Revision 2.3
5 volt
1 each
2.5" low profile
6.6" length
25W max. power
1 each
4.2" full height
6.6" length
25W max. power
PCI Express 2.0
2 each x1 slots
2.5" low profile
6.6" length
10W max. power
2 each x1 slots
4.2" full height
6.6" length
10W max. power
1 each x16 slot
2.5" low profile
6.6" length
25W max. power
1 each x16 slot
4.2" full height
6.6" length
75W max. power
Bays SFF MT
3.5" external 1 bay available for Media Card Reader unless used for a secondary hard drive
5.25" external 1 each
8.19" depth
2 each
8.19" depth
Internal HDD Bays 1 each
3.5" drives
2 each
3.5" drives
Controller
Hard Drive Controller These systems provide four serial ATA (SATA) interfaces that support transfer rates up to 6.0 Gb/s
(for ports 0 and 1, 3 Gb/s on all others). These systems can also support an external SATA (eSATA)
device through an optional bracket/cable assembly.
SATA Interfaces 2 ea. SATA 3.0
1 ea. SATA 2.0
1 ea. eSATA
Host SATA Controller Advanced Host Controller Interface (AHCI) Revision 1.2. The specification includes a description of
the hardware/software interface between system software and the host controller hardware.
QuickSpecs
HP Compaq 6200 Pro Series
Technical Specifications
DA - 13880 North America — Version 30 — August 15, 2013 Page 18