Select To do this
●
Enable/disable the parallel port.
●
Enable/disable the flash media reader.
●
Enable/disable the USB port.
CAUTION: Disabling the USB port also disables
MultiBay devices and ExpressCard devices on the
advanced port replicator.
●
Enable/disable the 1394 port.
AMT Options (all are disabled by default) NOTE: All AMT options are disabled by default.
●
Enable/disable Firmware Verbosity.
●
Enable/disable AMT Setup Prompt (CTRL-P).
●
Enable/disable USB Key Provisioning Support.
●
Enable/disable Unconfigure AMT on Next Boot.
●
Enable/disable Terminal Emulation Mode
●
Enable/disable Firmware Progress Event Support.
●
Enable/disable Include TYPE-131 in SMBIOS.
Set Security Level Change, view, or hide security levels for all BIOS menu items.
Restore Security Defaults Restore the default security settings.
Computer Setup menus 99
To Next Page
Loading...
