Switch cover and keyboard
Description Spare part number
Switch covers (includes power button board and cable)
For use only with HP Compaq 6535s Notebook PC models 497614-001
For use only with HP Compaq 6530s and 6531s Notebook PC models 491663-001
Keyboards for use in the following countries or regions:
Brazil
491653-201 Taiwan 491653-AB1
Japan 491653-291 Thailand 491653-281
Latin America 491653-161 The United States 491653-001
South Korea 491653-AD1
Before removing the switch cover and keyboard, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 46).
Remove the switch cover and keyboard:
1. Remove the following screws:
(1) Two slotted Torx ST8M2.5×7.0 screws
(2) Two Torx T8M2.0×2.0 broadhead (9-mm) screws
Component replacement procedures 57
To Next Page
Loading...
Need help?
General
