Hardware Reference Guide www.hp.com 2-3
Hardware Upgrades
Removing the Computer Access Panel and
Front Bezel
To remove the computer access panel:
1. Turn off the computer properly through the operating system,
then turn off any external devices.
2. Disconnect the power cord from the power outlet and the
computer, and disconnect any external devices.
Ä
CAUTION: Before removing the computer access panel, ensure that the
computer is turned off and that the power cord is disconnected from
the electrical outlet.
3. On the top of the computer, locate the cover latch. Pull up and
hold the latch 1 to release the computer access panel.
4. Slide the computer access panel back 2 about 0.5 inch (1.25 cm),
then lift the access panel up and off the chassis.
Removing the Computer Access Panel
To Next Page
Loading...
