HP Compaq dc7100 SFF - Uninstalling the Multibay Security Screw

2-38 www.hp.com Hardware Reference Guide
Hardware Upgrades
Uninstalling the MultiBay Security Screw
When installed, the MultiBay security screw disables the MultiBay
eject lever, so that a drive installed in the MultiBay cannot be
removed.
To remove a drive installed in the MultiBay, you must first remove
the security screw, if installed, using the FailSafe Key.
✎
If a FailSafe Key was not provided with the computer, contact an
authorized HP reseller or service provider. Order PN 166527-001 for
the wrench-style key or PN 166527-002 for the screwdriver bit key.
Uninstalling the MultiBay Security Screw (Wrench-Style Key shown)