HP Compaq nx6110 User Manual

Removal and Replacement Procedures
Maintenance and Service Guide 6–15
4. Disconnect the auxiliary and main antenna cables 1 from the
Mini PCI communications module.
✎
Make note of which antenna cable is attached to which antenna
clip on the Mini PCI communications module before
disconnecting the cables.
5. Spread the two retaining tabs 2 on each side of the Mini PCI
socket to release the Mini PCI communications module. (The
edge of the module opposite the socket rises away from the
computer.)
6. Remove the Mini PCI communications module 3 by pulling
the card away from the socket at a 45-degree angle.
✎
Mini PCI communications modules are designed with notches 4
to prevent incorrect installation.
Removing a Mini PCI Communications Module
Reverse the above procedure to install a Mini PCI
communications module.

HP Compaq nx6110 Specifications

General

Brand	HP
Model	Compaq nx6110
Category	Laptop
Language	English