HP Compaq nx6110 User Manual

6–38 Maintenance and Service Guide
Removal and Replacement Procedures
8. Swing the display assembly into a partially closed position.
9. Position the computer with the rear panel toward you.
Ä
CAUTION: Support the display assembly when removing the following
screws. Failure to support the display assembly can result in damage to
the display assembly and other computer components.
10. Remove the 4 Torx8 T8M2.0×9.0 screws 1 that secure the
display assembly to the computer.
11. Lift the display assembly 2 straight up and remove it.
Removing the Display Assembly
Reverse the above procedure to install the display assembly.

HP Compaq nx6110 Specifications

General

Storage	40 GB to 80 GB HDD
Optical Drive	DVD-ROM or DVD/CD-RW combo
Battery	6-cell Lithium-Ion
Battery Life	Up to 4 hours
Weight	2.7 kg (6.0 lbs)
Processor	Intel Pentium M or Intel Celeron M
RAM	Up to 2 GB DDR SDRAM
Display	15.0-inch XGA TFT
Graphics	Intel GMA 900
Operating System	Windows XP Professional
Networking	10/100 Ethernet
Ports	USB 2.0, VGA, headphone, microphone, RJ-11, RJ-45
Expansion Slots	1 x Type I/II PC Card