Removal and Replacement Procedures
Maintenance and Service Guide 5–31
5.16 Switch Cover
✎
Both switch cover spare part kits include an LED board and
LED board cable.
1. Prepare the computer for disassembly (Section 5.3).
2. Remove the keyboard (Section 5.9).
3. Turn the computer upside down with the rear panel
toward you.
4. Remove the two Torx8 T8M2.5×2.0 screws that secure the
switch cover to the computer.
Removing the Switch Cover Screws
Switch Cover Spare Part Number Information
For use with HP Compaq nx6325 models
For use with HP Compaq nx6315 models
430878-001
430877-001
To Next Page
Loading...
