2–2 Maintenance and Service Guide
Troubleshooting
1. Open Computer Setup by turning on or restarting the
computer, and then pressing
f10 while the “F10 = ROM Based
Setup” message is displayed in the lower-left corner of the
screen.
In Computer Setup, the following shortcuts are available:
❏ To change the language, press f2.
❏ To view navigation information, press f1.
❏ To close open dialog boxes and return to the main
Computer Setup screen
esc.
2. Select the Files, Security, Diagnostics, or System
Configuration menu.
3. To exit Computer Setup, choose one of the following
methods:
❏ To exit Computer Setup without saving your preferences,
use the arrow keys to select File > Ignore Changes and
Exit. Then follow the instructions on the screen.
❏ To save your preferences and exit Computer Setup, use the
arrow keys to select File > Save Changes and Exit. Then
follow the instructions on the screen.
To Next Page
Loading...
