Front-bezel control buttons
Auto-adjust the display to the ideal setting when the
OSD is not active / Enter the selected option
Pressing the “OK” button for 5 seconds shall be a hot-
key for the Input Select sub-menu. (select models)
Hot key to link volume level adjustment / Navigate
forward through the OSD menu and decreases
adjustment levels (Select modes).
Hot key to link to volume level adjustment / Navigate
backward through the OSD menu and increases
adjustment levels (Select modes).
Open, or select the OSD menu.
Turn the monitor on or off.
The Power button is located on the bottom right side
the monitor.
Control buttons are located on the front bezel of the monitor:
16
Chapter 4 Operating the Monitor
ENWW
Light up to indicate the power is turned ON.