Using the Setup Menu
You can access the Setup menu whether you are in Record or Playback mode.
The Setup menu allows to configure general camera settings.
To go to Setup Menu:
Press 1. Menu button to launch the Record/Playback
Menu.
Use the 2.
or keys to switch the menu tab to Setup menu.
Use the 3.
or keys to move through the menu selections.
To select an item, press the 4. OK button
or key.
Change the submenu settings using the 4-way navigation control.5.
Press the 6. OK button
to save and apply settings.
Setting Sounds
Use the Sound menu functions to control the sounds produced by the camera.
From the Setup menu, select 1. Sounds.
Adjusts sound settings.2.
Press the 3. OK button
to apply changes.
Item Available Settings Description
Startup Sound 1, Sound 2, Sound 3, Off Selects the startup sound when camera is turned on.
Shutter On, Off
Enables or disables shutter sound when Shutter button is pressed.
Shutter sound is not available when recording movies or voice
clips.
Beep
Volume
0-4 Adjusts volume.
Setting Power Save
The Power Save function allows you to set an idle time after which
the camera automatically sets to sleep mode to save power. After
a minute of being in sleep mode, the camera eventually turns off
power.
This function is not available in the following instances:
Recording a movie or audio file•
Playing a slideshow/video/audio file•
Using the USB connector•
To Next Page
Loading...
Need help?
General
