HP DC7600 - HP Utility Guide

6 www.hp.com Computer Setup (F10) Utility Guide
Computer Setup (F10) Utility
Storage
(continued)
Device Configuration
(continued)
Drive Type Emulation Options
ATAPI Zip drive None (treated as Other).
Diskette (treated as
diskette drive).
ATA Hard Disk None (treated as Other)
Disk (treated as hard
drive)
Legacy Diskette No emulation options
available.
CD-ROM No emulation options
available.
ATAPI LS-120 None (treated as Other).
Diskette (treated as
diskette drive).
Multisector Transfers (ATA disks only)
Specifies how many sectors are transferred per
multi-sector PIO operation. Options (subject to
device capabilities) are Disabled, 8, and 16.
Transfer Mode (IDE devices only)
Specifies the active data transfer mode.
Options (subject to device capabilities)
are PIO 0, Max PIO, Enhanced DMA, Ultra
DMA 0, and Max UDMA.
Computer Setup (Continued)
Heading Option Description
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.

HP DC7600 - HP Specifications

General

Chipset	Intel 945G Express
Memory	Up to 4 GB DDR2 SDRAM
Networking	Integrated Broadcom NetXtreme Gigabit Ethernet
Audio	Integrated High Definition audio
Operating System	Windows XP Professional
Processor	Intel Pentium 4
Storage	SATA Hard Disk Drive
Graphics	Integrated Intel Graphics Media Accelerator 950
Optical Drive	CD-ROM, DVD-ROM, DVD+/-RW
Form Factor	Convertible Minitower
Expansion Slots	1 PCI Express x16, 1 PCI Express x1, 2 PCI
Ports	USB 2.0, Serial, Parallel, VGA
Power Supply	240W