HP DC7600 - HP

Computer Setup (F10) Utility Guide www.hp.com 13
Computer Setup (F10) Utility
Security
(continued)
Smart Cover Allows you to:
• Lock/unlock the Cover Lock.
• Set the Cover Removal Sensor to
Disable/Notify User/Setup Password.
✎
Notify User alerts the user that the sensor
has detected that the cover has been
removed. Setup Password requires that the
setup password be entered to boot the
computer if the sensor detects that the
cover has been removed.
This feature is supported on some models only.
See the Desktop Management Guide on the
Documentation and Diagnostics CD for more
information.
Embedded Security Allows you to:
• Enable/disable the Embedded Security
device
• Reset the device to Factory Settings
• Enable/disable power-on authentication
support. (some models)
• Reset authentication credential. (some
models)
This feature is supported on some models only.
See the Desktop Management Guide on the
Documentation and Diagnostics CD for more
information.
Computer Setup (Continued)
Heading Option Description
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.