HP DC7600 - HP

Computer Setup (F10) Utility Guide www.hp.com 27
Computer Setup (F10) Utility
Recovering the Configuration Settings
This method of recovery requires that you first perform the Save to
Removable Media command with the Computer Setup (F10) Utility
before Restore is needed. (See “Save to Removable Media” on page 4
in the Computer Setup options table.)
✎
It is recommended that you save any modified computer
configuration settings to a diskette, a USB flash media device, or a
diskette-like device (a storage device set to emulate a diskette drive)
and save the diskette or device for possible future use.
To restore the configuration, insert the diskette, USB flash media
device, or other storage media emulating a diskette with the saved
configuration and perform the Restore from Removable Media
command with the Computer Setup (F10) Utility. (See“Restore from
Removable Media” on page 4 in the Computer Setup options table.)