HP DC7600 - HP Utility Guide

Computer Setup (F10) Utility Guide www.hp.com 5
Computer Setup (F10) Utility
File
(continued)
Default Setup Save Current Settings as Default
Saves the current system configuration settings
as the default.
Restore Factory Settings as Default
Restores the factory system configuration
settings as the default.
Apply Defaults and Exit Applies the currently selected default settings
and clears any established passwords.
Ignore Changes
and Exit
Exits Computer Setup without applying or
saving any changes.
Save Changes and Exit Saves changes to system configuration or
default settings and exits Computer Setup.
Storage Device Configuration Lists all installed BIOS-controlled storage
devices.
When a device is selected, detailed
information and options are displayed.
The following options may be presented.
Diskette Type
Identifies the highest capacity media type
accepted by the diskette drive.
Legacy Diskette Drives
Options are 3.5" 1.44 MB and
5.25" 1.2 MB.
Drive Emulation
Allows you to select a drive emulation type for
a certain storage device. (For example, a Zip
drive can be made bootable by selecting
diskette emulation.)
Computer Setup (Continued)
Heading Option Description
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.

HP DC7600 - HP Specifications

General

Chipset	Intel 945G Express
Memory	Up to 4 GB DDR2 SDRAM
Networking	Integrated Broadcom NetXtreme Gigabit Ethernet
Audio	Integrated High Definition audio
Operating System	Windows XP Professional
Processor	Intel Pentium 4
Storage	SATA Hard Disk Drive
Graphics	Integrated Intel Graphics Media Accelerator 950
Optical Drive	CD-ROM, DVD-ROM, DVD+/-RW
Form Factor	Convertible Minitower
Expansion Slots	1 PCI Express x16, 1 PCI Express x1, 2 PCI
Ports	USB 2.0, Serial, Parallel, VGA
Power Supply	240W