HP DC7600 - HP

18 www.hp.com Computer Setup (F10) Utility Guide
Computer Setup (F10) Utility
Security
(continued)
Restore Master Boot
Record (some models)
Restores the backup Master Boot Record to the
current bootable disk.
✎
Only appears if all of the following
conditions are true:
• MBR Security is enabled.
• A backup copy of the MBR has been
previously saved.
• The current bootable disk is the same disk
from which the backup copy of the MBR
was saved.
Ä
CAUTION: Restoring a previously saved
MBR after a disk utility or the operating
system has modified the MBR may cause
the data on the disk to become
inaccessible. Only restore a previously
saved MBR if you are confident that the
current bootable disk’s MBR has been
corrupted or infected with a virus.
Computer Setup (Continued)
Heading Option Description
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.