HP DC7600 - HP

Computer Setup (F10) Utility Guide www.hp.com 25
Computer Setup (F10) Utility
Advanced*
(continued)
*For advanced
users only.
Device Options
(continued)
Allows you to set:
• Unique Sleep State Blink Patterns. Allows
you to choose an LED blink pattern that
uniquely identifies each sleep state.
1 blink followed by 2-sec. pause = S1
2 blinks followed by 2-sec. pause = S2
3 blinks followed by 2-sec. pause = S3
• Integrated Video (enable/disable) Allows
you to use integrated video and PCI Up
Solution video at the same time (available
on some models only).
✎
After Integrated Video is enabled and
changes saved, a new menu item
appears under Advanced to allow you to
select the primary VGA controller video
device.
✎
Inserting a PCI or PCI Express video card
automatically disables Integrated Video.
When PCI Express video is on, Integrated
Video must remain disabled.
• Monitor Tracking (enable/disable).
Allows BIOS to save monitor asset
information.
Computer Setup (Continued)
Heading Option Description
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.