HP DC7600 - HP

Desktop Management Guide www.hp.com 15
Desktop Management Guide
Copying to Single Computer
Ä
CAUTION: A setup configuration is model-specific. File system corruption
may result if source and target computers are not the same model. For
example, do not copy the setup configuration from a dc7xxx PC to a
dx7xxx PC.
1. Select a setup configuration to copy. Turn off the computer. If you
are in Windows, click Start > Shut Down > Shut Down.
2. If you are using a USB flash media device, insert it now.
3. Turn on the computer.
4. As soon as the computer is turned on, press
F10 when the
monitor light turns green to enter Computer Setup. Press
Enter to
bypass the title screen, if necessary.
✎
If you do not press F10 at the appropriate time, you must restart the
computer and again press
F10 when the monitor light turns green to
access the utility.
5. If you are using a diskette, insert it now.
6. Click File > Replicated Setup > Save to Removable Media.
Follow the instructions on the screen to create the configuration
diskette or USB flash media device.
7. Turn off the computer to be configured and insert the
configuration diskette or USB flash media device.
8. Turn on the computer to be configured.
9. As soon as the computer is turned on, press
F10 when the
monitor light turns green to enter Computer Setup. Press
Enter to
bypass the title screen, if necessary.
10. Click File > Replicated Setup > Restore from Removable
Media, and follow the instructions on the screen.
11. Restart the computer when the configuration is complete.