Desktop Management Guide www.hp.com 19
Desktop Management Guide
Ä
CAUTION: Be sure that you have entered the correct drive letter for the
USB flash media device.
FORMAT will display one or more warnings and ask you each
time whether you want to proceed. Enter
Y each time. FORMAT
will format the USB flash media device, add the system files, and
ask for a Volume Label.
11. Press
Enter for no label or enter one if desired.
12. Copy any files you saved in step 9 back to your USB flash media
device.
13. Remove the diskette and reboot the computer. The computer will
boot to the USB flash media device as drive C.
✎
The default boot order varies from computer to computer, and it can
be changed in the Computer Setup (F10) Utility.
If you have used a DOS version from Windows 9x, you may see a
brief Windows logo screen. If you do not want this screen, add a
zero-length file named LOGO.SYS to the root directory of the USB
flash media device.
Return to “Copying to Multiple Computers” on page 16.
Unsupported USB Flash Media Device
To create a bootable USB flash media device, you must have:
■ a USB flash media device
■ a bootable DOS diskette with the FDISK and SYS programs (If
SYS is not available, FORMAT may be used, but all existing files
on the USB flash media device will be lost.)
■ a PC that is bootable from a USB flash media device
Ä
CAUTION: Some older PCs may not be bootable from a USB flash
media device. If the default boot order in the Computer Setup (F10) Utility
lists the USB device before the hard drive, the computer can be booted
from a USB flash media device. Otherwise, a bootable diskette must be
used.
To Next Page
Loading...
Need help?
General
