Rated Input Current (maximum)
1
2.2A @ 100VAC 1.1A @ 200VAC
Heat Dissipation
Maximum
Typical (idle)
139 kg-cal/hr
56 kg-cal/hr
550 BTU/hr
222 BTU/hr
1
This system utilizes an active power factor corrected external power supply. This allows the system to pass the CE mark
requirements for use in the countries of the European Union. The active power factor corrected power supply also has the
added benefit of not requiring an input voltage range select switch.
Table A-1 Specifications (continued)
ENWW 31
To Next Page
Loading...
