HP dc7800 series User Manual

Removing a Bezel Blank
On some models, there is a bezel blank covering the external drive bay that needs to be removed before
installing a drive. To remove a bezel blank:
1. Remove the front bezel.
2. Push the two retaining tabs that hold the bezel blank in place towards the outer right edge of the
bezel (1) and pull the bezel blank inwards to remove it (2).
Figure 2-5 Removing a Bezel Blank
ENWW Removing a Bezel Blank 13

HP dc7800 series Specifications

General

Chipset	Intel Q35 Express
Memory	Up to 8 GB DDR2 SDRAM
Audio	Integrated High Definition Audio
Processor Options	Intel Core 2 Duo
Graphics	Intel Graphics Media Accelerator 3100
Optical Drive	DVD-ROM
Network	Integrated Intel Gigabit Ethernet
Ports	USB 2.0
Expansion Slots	PCI, PCIe x1, PCIe x16
Operating System	Windows Vista, Windows XP
Power Supply	240W
Form Factor	Small Form Factor (SFF), Convertible Minitower (CMT)