The problem is solid bands or lines printed over the
image
This kind of problem can show itself in several different ways, illustrated below in
magenta:
1. A thick colored band
2. Thinner colored bands
3. Discontinuous colored blocks
4. Thin lines
In each case the recommended procedure is as follows:
1. Clean the electrical connections of the printhead that seems to be responsible (in
this example, the magenta printhead). See How do I clean a printhead's electrical
connections?.
2. Clean the printheads. See How do I recover (clean) the printheads?.
3. Reprint your image with the same settings as before.
4. If the problem persists, replace the printhead that seems to be causing the
problem. If you are not sure which printhead is responsible, use the Image
Diagnostics Print to identify it. See How do I use the Image Diagnostics Print?.
Chapter 13
192
The problem is print quality
To Next Page
Loading...
