Mac OS X 10.3 also supports IP over FireWire (see How do I access the
Embedded Web Server?). Make sure that your operating system is configured to
use IP over FireWire.
● At the printer's front panel, check that IP is enabled for the type of connection you
are using. Select the
icon, then I/O setup, then the type of connection you are
using, and check that you see IP enabled. If not, you may need to use a different
type of connection.
● If you normally access the Web through a proxy server, try bypassing the proxy
server and accessing the Web server directly. You can do this by modifying your
browser settings.
For instance, if you are using Internet Explorer 6 for Windows, go to Tools >
Internet Options > Connections > LAN Settings, and check the 'Bypass proxy
server for local addresses' box. Alternatively, for more precise control, click the
Advanced button and add the printer's IP address to the list of Exceptions for
which the proxy server is not used.
● Try switching off the printer (with the Power key on the front panel) and then
switching it on again.
The problem is an out-of-memory error
There is no direct relationship between the size of a file in your computer and the
amount of memory needed in the printer to print the file. In fact, because of file
compression and other complicating factors it is often impossible to estimate how
much memory will be needed. So it is possible that a print will fail for lack of memory
even though you may have successfully printed larger files in the past. In this case
you may need to consider adding more memory to your printer.
If you are using the Windows HP-GL/2 driver, you can often solve printer memory
problems by selecting the Services tab, then Troubleshoot software problems, then
Print job as a bitmap (process in computer).
Note If you select this option, the time needed to process the job in your
computer may be considerably longer.
The problem is an AutoCAD 2000 memory allocation error
After installing the printer driver, when you try to print for the first time from AutoCAD
2000, you may see a message saying Memory allocation error, after which your
image is not printed.
This is due to a problem in AutoCAD 2000, and it can be fixed by downloading the
Plotting Update Patch (plotupdate.exe) from the Autodesk Web site,
http://www.autodesk.com/.
This patch is also worth trying if you have any other strange problems when printing
from AutoCAD 2000.
221
The problem is something else
To Next Page
Loading...
