Tell me about drying time
With some printing materials and environmental conditions the ink needs some time to
dry before the printing material is unloaded. The following settings are available.
● Optimal: the printer automatically determines the appropriate drying time, based
on the printing material you have selected and the current temperature and
humidity. If any drying time is required, a “drying time to go” countdown will be
displayed on the front panel.
● Extended: the default drying time is extended. This can be used if you find that
the default drying time is not enough to dry the ink sufficiently in your environment.
● Reduced: the default drying time is reduced. This can be used if you are keen to
get prints as fast as possible, and you find that the reduced drying time causes no
significant problem in your environment.
● None: no drying time is provided. This can be used, for example, if you are
manually removing the prints as fast as the printer is producing them.
To change the drying time, see How do I change the drying time?.
Chapter 21
238
Tell me about paper
To Next Page
Loading...
