2. Remove the right-hand end of the spindle (1) from the printer, then move it to the
right in order to extract the other end (2). Do not insert your fingers into the
spindle supports during the removal process.
3. Remove the blue paper stop (1) from the left-hand end of the spindle. Keep the
spindle horizontal.
4. Slide the roll of paper that came with your printer onto the spindle. Make sure the
paper is oriented exactly as shown.
Note There is also a label on the spindle showing the correct orientation.
Chapter 2
48
How do I assemble the printer?
To Next Page
Loading...
