2–12
Company confidential. Genie User’s Guide, Edition 2, First Draft . Freeze Status: open
This is the blue on page 2–12 (seq: 54)
This is the black on page 2–12 (seq: 54)
The printer will start to take the sheet from you. At this point, let go!
Don’t touch the sheet while the printer feeds it out again a short way, as this would
probably misalign it.
11 The printer takes about a minute to check the alignment. While it’s doing this, the
Ready light on the front panel flashes.
Wait until ...
Either the
Ready light stops flashing, but stays
on:
Alignment good. Ready to print!
Or the Align Media lights starts flashing:
Working with media
Loading sheet media
Localization Note.
READY
This is the green on page 2–12
(seq: 54)
READY
ALIGN MEDIA
This is the green on page 2–12
(seq: 54)
To Next Page
Loading...