4-41
Service Tests and Utilities
HP Designjet 4500 Printer Series Service Manual
Code 51:10
. For more information on troubleshooting this error code, refer to
Page 2-17. Check also
System Error Code 07:10
(refer to Page 2-6).
7 The PHC Access Door Sensor will be tested next. When the following
message is displayed on the Front Panel, open the PHC Access Door and
press any key to continue.
8 If the PHC Access Door Sensor passes the test, the following message is
displayed on the Front Panel. Close the PHC Access Door and press any key
to continue.
If the
PHC Access Door
Sensor fails the test, the Front Panel will display
System Error Code 51.1:10
. For more information on troubleshooting this
error code, refer to Page 2-17. Check also
System Error Code 07:10
(refer
to Page 2-6).
9 The Drive Pinch Lever Sensor will be tested next. When the following
message is displayed on the Front Panel, raise the black Drive Pinch Lever
and press any key to continue.
10 If the Drive Pinch Lever Sensor passes the test, the following message is
displayed on the Front Panel. Lower the black Drive Pinch Lever and press
any key to continue.
To Next Page
Loading...
