7. Press the Up key
once to select two
minutes.
The display shows the
Manual drying time setting
menu with two minutes
selected.
8. Press the Enter key to
set the drying time to two
minutes.
If the front-panel buzzer is set
ON, there will be a short
‘beep’ to confirm the change.
A tick mark (√) in the right side
of the field confirms the value.
9. Press the Top key to
return to the top level
menu.
The display shows the Ink
menu.
Previous …
Setting drying time navigation example
Key action Display Result
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...