3
Company confidential. Murillo QRG. Edition 1. Freeze Status: not frozen
This is the cyan on page 3 (seq: 3)
This is the black on page 3 (seq: 3)
Loading and Unloading Media
To Change a Roll of Media
Make sure the plotter wheels are locked, by firmly pressing down the
brake levers on the wheels.
1837a 0022
A
Continued...
1 Remove any unused media from the media path as shown on page
7.
2 Remove the old roll by pulling firmly on each end of the spindle.
A
B
3 Rest the old roll upright on the
floor with media stop (A) at
the top.
4 Pull out the media stop/spindle
and set it aside.
5 Remove the end–cap (B) from the other
end of the old roll.
B
0021
Localization Note. Graphics on this page have been taken from the 750C English User’s
Guide pages 3–10 and 3–11.
To Next Page
Loading...
