5
Company confidential. Murillo QRG. Edition 1. Freeze Status: not frozen
This is the cyan on page 5 (seq: 5)
This is the black on page 5 (seq: 5)
To Load Roll Media
1 Hold the media by both edges and align its right edge with the
perforated line on the entry platen.
2 Insert the media into the plotter, until it buckles slightly.
1839
3 When the plotter begins to pull in the media, let it go.
4 Press next to the front-panel display to indicate you are
loading roll media.
Sheet load
Roll load
↓
↑
––––––––>
––––––––>
5 Scroll until the display shows the type of media you are
loading*, and then press the
Enter key.
*For advice on media types, see pages 12 and 13.
SELECT MEDIA
Opaque bond
Enter
↓
↑
Continued...
A
Media path
0017
0014
A
Localization Note. Graphics and some of the text on this page have been taken from the
750C English User’s Guide pages 3–14 and 3–15. “release it” changed to “let it go”. Steps
1,2 and 3 changed. *footnote added. The rest the same as Loquillo/750C QRG.
To Next Page
Loading...
