Ink Supply Station PCAs (Upper and Lower) 391
Removal & Installation
Ink Supply Station PCAs (Upper and Lower)
Removal
1. Remove the Left Cover
⇒
See page 325
.
2. Pull out the top row of Cartridge Trays and remove the
Ink Cartridges.
3. Close the top row of Cartridge Trays and pull out the
bottom row.
4. Pull out the bottom row of Cartridge Trays and remove
the Ink Cartridges.
WARNING!: Switch off the printer and remove the power cable.
NOTE: You MUST NEVER replace both the Hard Disk Drive and the Ink Supply PCAs at the same time.
If both parts need to replaced, you MUST first replace one part and then power ON the Printer until it
completely initializes. Then you can power OFF the Printer and replace the other part.
To Next Page
Loading...