450 Chapter 8 Removal & Installation
Removal & Installation
Main PCA Formatter
Removal
1. Remove the Sausalito PCI PCA
⇒
See page 444
.
2. Remove the Memory Module
⇒
See page 448.
3. Disconnect ALL cables connected to the Main PCA
Formatter.
4. Remove eight T-10 screws (Type I) that secure the
Main PCA Formatter.
WARNING!: Switch off the printer and remove the power cable.
CAUTION: Do NOT remove the Fan or the Processor (located under the Fan) from the Main PCA
Formatter - The Fan and the Processor are part of the Main PCA Formatter support part and should be
replaced as one assembly.
To Next Page
Loading...