Individual Pinchwheel Rollers 569
Removal & Installation
4. Remove the two inter-Pinchwheel rollers from both sides
of the Pinchwheel. Remove first the left one (1) and then
the right one(2). You need to go from right to left,
doing this until you reach the individual Pinchwheel
that you need to remove
5. When you have reached the individual Pinchwheel
roller, push apart the metal part that secures the
Pinchwheel roller.
6. Pull out the individual Pinchwheel roller.
Installation of the Drive Roller
1. When installing the new Pinchwheel rollers, make sure
they are the new type.
To Next Page
Loading...