Color management from the front panel
You can color-calibrate the loaded paper type from the front panel by selecting the Image Quality
Maintenance menu icon
, then Calibrate color. See Color calibration on page 91.
The other color options in the front panel can all be found by selecting the Setup menu icon
, then
Printing preferences > Color options.
NOTE: These front panel settings can all be overridden by the printer driver or Embedded Web Server job
submission settings.
●
Color/Grayscale: you can choose to print in color or in shades of gray. Default: Print in color.
●
Select RGB source profile: you can choose from a selection of RGB source profiles recognized by the
printer. Default: sRGB (HP).
●
Emulate printer: you can choose to emulate a different HP Designjet printer. Default: Off (no printer
emulation).
TIP: If you have old HP-GL/2 or PostScript files made for a different HP Designjet printer, you can send
them to the printer and use the front panel to turn on the appropriate emulation mode.
ENWW Color management from the front panel 99
To Next Page
Loading...