Bonjour connection
1.
Go to your printer's front panel and select the Connectivity menu icon
, then Gigabit Ethernet or
Jetdirect EIO, then View configuration. Note the mDNS service name of your printer.
2. Insert the HP Start-up Kit DVD into your DVD drive.
3. Open the DVD icon on your desktop.
4. Open the Mac OS X HP Designjet Installer icon.
5. Follow the instructions on your screen. You are recommended to use the Easy Install option.
6. The printer software is installed, including the printer driver and the HP Utility.
7. When the software has been installed, the HP Printer Setup Assistant starts automatically, to set up a
connection to your printer. Follow the instructions on your screen.
8. When you reach the Select Printer screen, look for your printer's mDNS service name (which you noted
in step
1) in the Printer Name column.
●
If you find the right printer name, scroll sideways to see the Connection Type column, and check
that it shows Bonjour. Then highlight that line. Otherwise, continue searching further down the
list.
●
If you cannot find your printer name with a Bonjour connection type, check the box My printer is
not in the list.
Click Continue.
ENWW Connect to a network (Mac OS) 15
To Next Page
Loading...